Paneltim plastic panels for floors, staircases and pontoons
Paneltim panels from polypropylene (PPcopo) or polyethyleen (PEHD) are - in view of their internal cell structure (50 x 100 mm of 50 x 50 mm) - light yet very strong. They are shock resistant and resistant against most chemical substances. This makes Paneltim panels very suitable for flooring applications and for use in staircases, to build jetties,...
Also the panels are closed all around and easy to clean with a high pressure cleaner, providing maximum hygiene.
Thanks to their good insulation value (plastic low thermal conductivity, air enclosure in cell structure) Paneltim plastic panels are excellent elements for use in flooring applications. Internal condensation of water is not possible.
Paneltim antiskid panels are available in three profiles: studs or checker plate and orange peel.
They are manufactured using the same manufacturing system and related high quality requirements as used for regular panels. In terms of strength they are comparable to the strongest Paneltim panels; indeed antiskid panels are produced standard with an internal cell structure of 50 x 50 mm.
Both profiles have been tested in detail for their antiskid properties both in dry and in wet state. They are suitable for human and animal floor applications. There are many applications for use in floor elements in corridors, passage ways, on stair cases, covers, etc.
In some sittuations it can be interesting to integrate Paneltim plastic slats in a floor.
The slats are made out of PP copo. They are 100% recyclable and resistant to corrosive environments. And yet again: thanks to the typical plastic surface (smooth, nonabsorbent, water and dirt repellent) internal accumulation of dirt, molds or bacteria is not possible.
Paneltim PPcopo or PEHD panels are strong, and are easy to process in applications with staircases as well. Such constructions are typically light, strong and resistant to dynamisch loads. Integrating Paneltim antiskid panels will further improve the design.
Jetties and pontoons
Floating pontoons and jetties are another application of Paneltim plastic panels. Integration of antiskid panels will improve antiskid properties of the pontoon.
Advice and support
• Paneltim strongly recommends to avoid dark colors for outside use.
• Paneltim strongly recommends prime material for structural applications.
• Technical datasheets are only available for panels in prime material.
Paneltim plastic sandwich panels, slats and accessories are available through a global dealer network. Please contact your local dealer for further information. We are always available to assist you in locating a dealer in your neighborhood.Contact us
for more information
- High pressure cleaning