Paneltim Multipower panels
Paneltim Multipower panels are the strongest and most robust panels in the Paneltim plastic sandwich panel assortment.
2" x 2"
102.36" x 39.37" x 1.97"
First internal rib at 25mm from the edge
•Less losses during butt welding (2%)
• Excellent symmetrical welding
• Short welding cycle (± 1,5 min/cycle)
PP prime: UV beige (RAL 7032), UV white (RAL 9010)
PP near to prime: Light grey (RAL 7001, non UV)
No internal accumulation of dirt
The internal cell structure ensures that the panels are always closed all around, even when cutting to size, avoiding ingression of dirt or moisture into the panels.
The panel can be processed using regular technic to make plastic constructions: butt welding, extrusion welding or hot air welding. The short welding cycle considerably improves overall processing time.
The panels being manufactured in prime polypropylene or polyethyleen, joining with solid panels, tubes, etc is possible.
Available on request
• Structural analysis
• Technical files
Advice and support
• Paneltim strongly recommends avoiding dark colors for outside use.
• Paneltim strongly recommends prime material for structural applications.
• Technical datasheets are only available for panels in prime material.
Paneltim plastic panels and accessories are available through a global dealer network. Please contact your local dealer for further information. We are always available to assist you in locating a dealer in your neighborhood.