Paneltim plastic panels for your pig barn
Using Paneltim panels and slats in your barn will ensure top hygiene for top pigs, allowing pig farmers around the world to comply to stringent and ever increasing sanitary and hygiene requirements in pig production.
Penning, partition walls, floors, doors, … out of Paneltim panels are fast to clean and easy to maintain. They are compatible with the extremely corrosive environment of a pig farm (manure, urine, high humidity, etc).
Paneltim panels are highly shock resistant. Thanks to the internal 50 x 100 mm or 50 x 50 mm (2x4" or 2x2") cell structure Paneltim panels are light yet very rigid and strong.
With Paneltim panels it is very easy and efficient to produce penning of variable dimensions, both for renovations as in new projects. Paneltim is offering a broad assortment of panels with thicknesses of 20 mm, 35 mm and 50 mm (0.8", 1.4" and 2"), offering solutions for pig penning throughout the entire production cycle.
Paneltim venti panels for visual contact
Standard venti panels are supplied with slots at half the height of the panel, so that direct physical contact between the smallest piglets, which are very sensitive to disease transfer, can be avoided. The slots however do allow air circulation through intermediate partitioning or front panels. Other slot configurations (e.g. in order to increase air throughput) can be offered made to measure, thanks to the flexibility and endless combination possibilities of the Paneltim panels.
Paneltim combination panel influencing pig dunging behavior
A partly warm and cold floor can be repeated across the barn. In that respect Paneltim can offer a combination panel, combining closed panels and venti panels into a single panel, in order to influence pig dunging behavior. Furthermore liquid feeding pipes can be integrated into the panel on demand.
Paneltim walls and doors
Paneltim panels can be used to produce walls and doors of various dimensions and heights, and with high hygienic finishing. Possible applications: compartment walls, walk ways (light, rigid and strong, modular mounting with an extensive assortment of plastic profiles) and internal doors (impact resistant and flexible measurements).
Paneltim lining of walls and ceilings.
Walls and ceilings can be lined hygienically using Paneltim open half panels with 11 mm or 27 mm (0.43" or 1.06") thickness. They are smooth on one side and have the open rib structure on the other side. For fast and easy mounting Paneltim can offer a modular system of plastic profiles. If necessary the half panels can be temporarily dismounted again in order to install utility lines.
Paneltim half panels are easy to mount, also on surfaces that are difficult to coat. They can protect less corrosive resistant inner or outer walls and avoid the creation of thermal bridges.
Paneltim antiskid floors
In addition to the flat panels Paneltim can also offer an assortment of panels with antiskid profiles: studs or checker plate and orange peel.
Paneltim antiskid panels are manufactured using the same manufacturing system and related high quality requirements as used for regular panels. In terms of strength they are comparable to the strongest Paneltim panels; indeed antiskid panels are produced standard with an internal cell structure of 50 x 50 mm (2x2").
These antiskid panels can find various applications in pig barns, e.g. for floor elements, passage ways, staircases and covers. Also these antiskid panels can be made to measure. And finally, where applicable/necessary, half panels with antiskid profile can be provided.
Paneltim Plus Slats
Paneltim is also offering a full plastic alternative for slats in pig barns; orange PP slats for piglets (including farrowing floors and nurseries) and green PP slats for heavier animals.
Also the slats are made out of PP copo. They are 100% recyclable and resistant to the strong corrosive environment of a pig barn (manure, urine, humidity, etc). And yet again: thanks to the typical plastic surface (smooth, nonabsorbent, water and dirt repellent) internal accumulation of dirt, molds or bacteria is not possible.
Advantages in pig barns
With Paneltim plastic sandwich panels and slats
A diverse assortment of colors and color combinations allow for a comfortable working environment in the barn. For instance: it is possible to choose the color of the penning at the bottom of a wall, and work towards the ceiling with a brighter color. Also a selection of colors linking into your company colors could be possible.
With a minimum of water Paneltim panels can be cleaned fast, and the surface will dry quickly and easily.
The panels are closed all around - even when made to measure - thanks to their internal cell structure. As a result internal accumulation of dirt, molds or bacteria is not possible. The surface is smooth, nonabsorbent and water and dirt repellent.
Paneltim can offer a broad assortiment of accessories, as well as large manufacturing capacity for the panels. This will allow for short delivery times.
Good insulation properties
Paneltim panels have good insulation values thanks to the low thermal conductivity of plastic in general, as well as the enclosed air in the cell structure. Internal condensation of water is not possible.
Easy processing and fast mounting
Paneltim panels are easy to process using regular hand tools, like sawing, drilling, screwing, milling and welding. The internal cell structure of the Paneltim panels makes them light yet rigid and strong. They can be welded together to different sizes. And because of their light weight, Paneltim panels are surprisingly easy to manipulate, even at large dimensions.
Paneltim plastic sandwich panels, slats and accessories are available through a global dealer network. Please contact your local dealer for further information. We are always available to assist you in locating a dealer in your neighborhood.Contact us
for more information
- Optimal hygiene
- Fast cleaning
- Easy processing
- Fast mounting
- Good insulation
- 100% recycable